Skip to content

12 years in business, 30 years installing. Free quote: (909) 402-2155

(909) 402-2155

ServicesWindow Installation

Window Installation in Diamond Bar

Adding a window to an addition, a remodel or a wall that never had one takes more than setting glass in a hole. We size the opening, flash it against rain, set the frame plumb and seal it so the room stays quiet and dry.

Installer in cap and tool belt presses black flashing tape beside a new white vinyl window in a house-wrapped stucco wall, ladder and supplies nearby

New windows for new openings

Window installation is the work we do when there is no old window to swap out. That covers room additions, garage conversions, ADUs, kitchen and bath remodels, and walls where you simply want more light. If you already have a window and just want a better one, our Window Replacement or Window Retrofitting services are the better place to start.

Most homes around Diamond Bar are stucco over wood framing. A new opening means cutting the stucco cleanly, framing a proper header, and layering building paper and flashing so winter rain sheds away from the wall instead of running behind it. That layering is the part you never see, and it is the part that matters most.

We also hear from homeowners who are rebuilding a room after wind or water damage. We help you sort out what has to happen first and what can wait, so the new windows go into sound, dry framing and your home is closed up properly.

What our installation covers

Opening layout and sizing

We measure the wall and check where studs, wiring and plumbing run before anything is cut. The rough opening is confirmed against the window you chose, so nothing is forced to fit.

Header and framing

A new or enlarged opening in a bearing wall needs a header sized to carry the load above it. We frame it square so the sash slides or swings smoothly instead of binding.

Flashing and weather barrier

Sill pan, side flashing and head flashing go in overlapping so water drains out and down. This is what keeps a winter storm from staining your drywall a year later.

Setting and sealing

The frame is shimmed plumb and level, fastened to the manufacturer's instructions, then sealed with low-expansion foam and exterior sealant.

Stucco and interior finish

We patch the stucco around the new window and finish the inside with trim or drywall returns, ready for your paint.

Permit and cleanup

When the work calls for a building permit, we pull it and schedule the inspection. Debris and stucco dust leave with us.

Worker in a cap and tool belt points at a cracked window on a stucco house while a homeowner looks on, with a ladder, bucket and toolbox on the patio

When a new window installation makes sense

You are adding on or converting space
A new bedroom, ADU or converted garage needs windows that meet light and egress requirements. Planning them early keeps framing and inspection on track.
A room feels dark or stuffy
A hallway, stairwell or kitchen with one small window can change completely with a second opening placed to catch a cross breeze on hot afternoons.
You are rebuilding after damage
If wind, water or a fallen tree has forced you to open up a wall, it is a sensible time to put windows where you want them and flash them correctly.
The old opening was never built right
Soft wood under the sill or water stains below the corners usually mean the opening itself needs rebuilding. A new window in a bad opening will leak the same way.
You are remodeling a kitchen or bath
Adding a window over a tub or resizing one over a moved sink counts as new installation work, and it is easiest to do while the walls are already open.

How an installation job goes

  1. 1

    Free in-home estimate

    We look at the wall inside and out, talk through the windows you have in mind and explain what the job involves. These are free in-home estimates with no sales pressure or obligation.

  2. 2

    Written quote and permit

    You get a written quote listing the windows, framing, flashing and finish work. If a permit is needed, we file it and tell you the expected timeline.

  3. 3

    Opening and framing

    We cover floors and furniture near the work area, cut the opening and frame the header and sill. If the job runs past one day, any open wall is sheathed and wrapped before we leave.

  4. 4

    Install, seal and finish

    The window is set, flashed, foamed and sealed, then the stucco and interior trim are finished around it. We open, close and lock every sash to check the fit.

  5. 5

    Inspection and walkthrough

    If there is a permit, we meet the inspector. Then we walk the work with you and show you how to care for the new windows.

What affects the cost of window installation

Every new opening is a little different, so we price it after we have seen the wall. Your written quote separates the window from the framing and finish work, so you can see exactly where the money goes. The visit itself costs nothing: we offer free in-home estimates with no sales pressure or obligation, and you can get your quote by phone.

Window size and type
A small fixed bathroom window and a wide slider are very different jobs. Frame material, operating style and the glass package all move the price, and the dual-pane options on our Energy Efficient Windows page add comfort along with cost.
Wall construction
Stucco over wood framing is the most common case. A bearing wall that needs a larger header, or brick and siding, adds time and material.
What is inside the wall
Wiring, plumbing or ductwork in the path of the new opening has to be moved first, which can bring in another trade.
Access and height
Second-story and hillside openings may need scaffolding or extra setup to work safely.
Permit and finish work
Permit fees, stucco patching and interior trim are part of the total, and each one is listed on your quote.

Window installation questions

Do I need a permit to add a new window?
Usually, yes. Cutting a new opening or enlarging an existing one changes the structure of the wall, and cities in our area generally require a building permit and inspection for that. We handle the paperwork and are there when the inspector comes.
How long does it take to install a new window?
A single new opening in a stucco wall often takes one to two days, including framing and stucco patching. Larger openings or several windows take longer, and fresh stucco needs time to cure before paint. You get a timeline with your quote.
Will my home be open to the weather overnight?
We plan the work so openings are closed in before we leave each day. If a window cannot be set the same day, the opening is sheathed and wrapped so wind, dust and rain stay out.
Can you put windows into an addition another contractor is building?
Yes. We coordinate with your builder on rough opening sizes and the order the weather barrier goes on, so the windows tie into the wall correctly instead of being caulked in after the fact.
How is this different from window replacement?
Installation means creating or rebuilding the opening. Replacement swaps a new window into an opening that is already sound. If your current windows only need updating, window replacement or window retrofitting is usually quicker and less disruptive.

Let's plan your new window

Tell us about the room and the light you want. We'll come out, look at the wall and give you a clear written quote with no pressure to sign.