Skip to content

12 years in business, 30 years installing. Free quote: (909) 402-2155

(909) 402-2155

ServicesWindow Retrofitting

Window Retrofitting in Diamond Bar

Retrofitting puts new windows into your home without cutting into the stucco around them. We remove the old sashes and glass, fit a new unit into the existing frame and seal it tight. Most homes stay livable the whole time, with very little dust.

Gloved installer caulks around a new white vinyl insert window set inside a weathered wooden frame on a beige stucco house wall, ladder nearby.

What Window Retrofitting Is and When It Makes Sense

A retrofit window is built to fit inside the frame you already have. We take out the old glass, sashes and tracks, leave the original frame attached to the wall, and set the new window in place with a flange that covers the old metal. Your stucco, drywall and interior trim stay where they are.

It's often the right call when the frames themselves are solid and square but the windows have stopped doing their job. Many homes around Diamond Bar still have their original single-pane aluminum windows, and those are good candidates. If a frame is bent, rotted or pulling away from the wall, a full-frame job through our window installation service is usually the better choice, and we'll say so.

After a windstorm cracks a pane or loosens an old slider, retrofitting is also a sensible way to get the opening sealed and secure again without turning a broken window into a construction project.

What's Included in a Retrofit

Measuring every opening
Retrofit windows are made to size, so we measure each opening in several places. Old frames are rarely perfectly square, and those small differences decide how well the new window seals.
Careful removal of old glass and sashes
We take out the old panes, sashes and tracks by hand and haul them away. Broken glass from storm damage is bagged and removed the same day we install.
Fitting and leveling the new window
The new unit is set into the existing frame, shimmed level and fastened. We check that each sash opens, closes and locks smoothly before moving on.
Sealing inside and out
We run sealant around the exterior flange and finish the interior gaps so drafts, dust and rain stay outside. This step matters most in windy weather.
Floor and furniture protection
Drop cloths go down at every window we work on, and we move furniture only as much as we need to.
Cleanup before we leave
We vacuum, wipe down sills and take every scrap of old window with us.

Signs Your Windows Are Ready for a Retrofit

  • Cracked or broken panes after wind

    Strong gusts can crack aging glass or knock loose a pane in a worn frame. If the frame is still sound, a retrofit replaces the whole window rather than patching one piece.

  • Sliders that stick or jump the track

    Worn rollers and bent tracks on old aluminum sliders make windows hard to open and easy to leave unlocked. That's a security problem as much as an annoyance.

  • Fog between the panes

    Cloudiness inside a dual-pane window means the seal has failed and the insulating gas is gone.

  • Drafts, dust and whistling

    If you can feel air or see dust on the sill after a breezy day, the seals have worn out.

  • Hot rooms in summer

    Single-pane glass lets a lot of heat through, which keeps the air conditioning running. Our energy efficient windows page covers the glass options in more detail.

What Affects the Cost of Retrofitting

Retrofitting usually costs less than full-frame work because the walls stay untouched. Your final number depends on how many windows you have and the choices you make for them. We put every line in writing before any work starts, so there's nothing to guess about later.

Number and size of windows

More windows means more material and labor, though larger orders often bring the per-window cost down. Oversized or unusual sizes cost more to build.

Window style

Sliders and single-hung windows are the simplest. Casements, picture windows and specialty shapes take more parts and more fitting time.

Glass package

Low-E coatings, gas fills and laminated or tempered glass add cost and improve comfort, noise control or safety.

Frame condition and access

Frames that need extra squaring, or second-story windows that need ladders and more time, can add to the job.

How Your Retrofit Day Goes

  1. 1

    A free in-home estimate

    We look at each window, check the frames, measure, and explain whether retrofit or full-frame makes more sense for each opening. There's no sales pressure and no obligation.

  2. 2

    Ordering your windows

    Once you choose your style and glass, we order windows built to your measurements. If you have a broken pane in the meantime, we'll talk through how to keep that opening safe until install day.

  3. 3

    Installation, one window at a time

    Each opening gets its new window fitted and sealed before our crew touches the next one. That way you never have several bare openings in your walls at once. Many homes are finished in a single day.

  4. 4

    A final check with you

    At the end of the day we go room to room together, testing each latch and sash so you know everything works. We also show you how the sashes tilt or lift out, which makes cleaning the glass much easier.

Worker in a cap and tool belt points at a cracked window on a stucco house while a homeowner looks on, with a ladder, bucket and toolbox on the patio

Window Retrofitting Questions

Will retrofit windows make my windows look smaller?

Slightly. Because the new window sits inside the old frame, you lose a small strip of glass around the edge. Most homeowners barely notice, and we'll show you a sample at the estimate so you can judge for yourself.

Do you have to remove my stucco?

No, that's the main reason people choose a retrofit. The flange on the new window covers the old frame from the outside, so the stucco around the opening stays intact.

One of my windows broke in a windstorm. Should I replace just that one?

You can, and we'll quote it that way. If the rest of your windows are the same age, it's worth knowing that matching one new window to old ones can look uneven. We'll give you both options and let you decide.

Is retrofitting as energy efficient as full-frame replacement?

The glass and window unit perform the same. A retrofit relies on the old frame staying sound and well sealed to the wall, which is why we check every frame before recommending it.

Do I need to be home during the work?

It helps to have an adult at the house in the morning to walk through the plan with us, and later in the day to look over the finished windows. Between those two points the crew handles everything on its own. You're free to work, run errands or settle into a room we aren't working in.

Find Out if Retrofitting Fits Your Home

We'll look at your frames, measure your windows and give you a straight answer on retrofit or full-frame. We serve Diamond Bar along with Walnut, Chino Hills, Rowland Heights and nearby towns.